Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts & Accessories
$6.50 - $23.95
- Shim adds support to Presta stem used in a Schrader rim
$49.99
Don't let flats stop your ride!
The legendary combination of durability, protection, and run-flat performance of Vittoria Air-Liners, made for your favorite tubeless-ready road tires! The Vittoria Air-Liner system provides unmatched bump compliance and impact protection, while ensuring bead lock at lower pressures. In the event of air-loss, the Vittoria Air-Liner Road system is designed for run-flat use. The insert increases the safety of your tubeless set-up by keeping the tire in place even in case of puncture - No risk to ride on the wheels! The Vittoria Air-Liner Road system is compatible with all tubeless road tires on the market. The lightweight material absorbs no sealant, while the proprietary Vittoria tubeless valves eliminates valve clogging. Whether you are training, touring, exploring, or racing, the Vittoria Air-Liner Road system will provide peace of mind and protection for the ride ahead.
The Air-Liner Road bag contains:
- One Air-Liner Road insert
- Two Multiway valves
Sizing recommendation:
- Small, 700 x 23-26mm
- Medium, 700 x 27-29mm
- Large, 700 x 30-32mm
$10.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride.
Available in three sizes for varying tire volumes:
- Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure.
- 75mL: Repairs and inflates low-volume MTB tires in less than a minute.
- 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
$3.50 - $42.00
Stan’s NoTubes Sealant is a thin, low-viscosity liquid that coats the tire interior and seals punctures quickly. Two ounces of Stan's in a tubeless tire can repair punctures up to 1/4" to keep you rolling. Stan's Tire Sealant is formulated to stay liquid in tires for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart can convert up to 16 tires.
- Suitable for use in tubeless tires and standard tubes
- Designed to seal punctures up to 1/4"
- Stable down to -30 degrees Fahrenheit
- Non-hazardous, non-corrosive, non-toxic
- Contains natural latex
$52.00 - $59.99
- Create an air tight seal for BST rims
- Can also be used as a lightweight rim strip for any rim
$3.99 - $34.00
The Product that Started a Tubeless Revolution
Inside this simple bottle is a product that changed cycling. Today's tubeless systems rely on the lighter, more reliable, self-sealing performance of Stan's Tire Sealant.
Just two ounces of Stan's in a converted standard tire or tubeless tire can repair punctures up to 1/4-inch almost instantly to keep you rolling. Longer-lasting Stan's Tire Sealant is formulated to stay liquid in tires with even thin casings for up to seven months. Arid conditions require more frequent monitoring of sealant levels, but anti-freezing agents in our special formula allow Stan's Tire Sealant to be used in temperatures as cold as -30° F. One quart will convert up to 16 tires.
- First choice of riders around the world for tubeless conversion and flat prevention
- Seals punctures up to 1/4-inch (6.5mm) quickly
- Stays liquid 2-7 months for long-lasting protection
- Premium low-viscosity formula resists freezing to work in environments as cold as -30° F (-34° C)
- Natural materials, safe for the environment
- Can be injected through valve stems with removable cores compatible with tubes and tubular tires
$4.99
If you've heard the expression "to Stan's a tire," it's referring to Stan's Tire Sealant. Put the recommended amount in your road, mountain and cyclocross tires and it will stop slow leaks and seal small punctures. This is enough sealant for one tire.
$15.00
A new and improved Tubeless Sealant Injector syringe supports the needs of modern tire sizes and the higher volume fill of sealant required, for a flat-free riding experience. The larger volume 150ml injector makes application of sealant simple, with no mess or waste of sealant.
- Larger 150ml volume gives you the ability to inject sealant into today’s higher-volume mountain, gravel, and road tires with a single fill
- New easy press-on adapter presses directly onto Presta and Schrader valve stems for quick fills without threading or additional parts
- Patent pending top-fill, drip-free system features a cross-slit valve in the fitting paired with a unique air-relief channel in the injector body allows a precise fill of well-shaken sealant from the top for a convenient set-up with zero mess
- Hose plug included for hanging on your workbench or mess-free storage in your toolbox
$11.99 - $42.00
Use Ultimate Tubeless Sealant Replenisher to inject into your tires and keep your Ultimate Tubeless Sealant w/FiberFoam going for 12-18 months!
- Effective down to 0F/ -18C
- Compatible with sealant injectors
- Comes with rubber hose for easy injection
- When used every 90-120 days, can extend Ultimate Tubeless Sealant w/FIBERFOAM life to a year
- Use Replenisher every 90-120 days for best performance
- Made in the USA
$17.99 - $37.99
Ultimate Tubeless Sealant uses FiberFoam technology to harness the power of carbon fiber to seal up to 7mm punctures without losing pressure. Get it while supplies last.
- Effective down to 10F/ -12C
- Seals 7.5mm holes for up to 6mo
- Must be poured into tire during install
- Not injector compatible (It seals holes bigger than your valve)
- Use Replenisher every 90-120 days for best performance
- 6, 9, and 12mm recycled carbon fibers are dispersed evenly by a foaming latex to create ultra strong seals
- Made in the USA
$14.99 - $32.97
Prevents thorns and other road debris from puncturing the inner tube and deflating the tire.
- Packaged in a process that avoids the difficult to install "pigtails" traditionally associated with liners
- Equipped with Soft-Tips that prevent friction flats at the overlapping seam
- Sold in pairs
$11.99
The Problem Solvers Presta Valve Extenders add 30 to 70mm of length to your tube or tire valve so that it protrudes far enough out of deep-section rims so that you can attach your pump. These lightweight, durable aluminum extenders are for use with Presta valves that have removable cores. The proper tool for removing the cores and installing the extenders is included.
$49.99
- Tubeless conversion kits include 12 yard roll of tubeless tape (2) RVC valves RVC tool twist-lock injector and 8oz of latex sealant
- Contains multiple shapes and sizes of solid particles called nanites which quickly seal any hole up to 1/4
- Fat tire
$8.79 - $21.99
Your tubeless wheels will benefit from the use of Orange Seal Tubeless Tire Sealant. It is proven to seal large punctures up to 1/4-inch and perform under varying temperatures and altitudes. Orange Seal Tubeless Tire Sealant is compatible with most bike tire systems and is eco-friendly.
$29.99 - $34.99
- The same tubeless valves, now with a Tire Insert air flow system
- 6 slots machined into the base of the valve stem allow air to flow freely around tubeless tire inserts
- Upgraded to aircraft grade 7075 aluminum valve stem and cap
- 4mm machined Allen Key slot for easy installation/removal
- Valve core removal tool integrated into valve cap
- Includes multiple rubber bases to optimize fit with multiple rim types
$17.58 - $21.90
- 2-ply rubber shield fits between tire and tube to prevent flats
$55.00
CushCore is an engineered foam insert to be mounted inside a tire, designed to absorb impacts, reduce vibration, and increase lateral stability. These characteristics translate to a more controlled, comfortable, and faster ride.
- The system is designed to be used with tubeless-ready or tubeless converted rims and tires and is compatible with tubeless tire sealants
- The insert divides the inner volume of the tire in half, maintaining air underneath the tread and the foam insert next to the rim
- Fits tire widths 2.1 – 2.6" and rims with internal width 22 – 35mm
Includes
- 1 CushCore Insert
- 1 CushCore Tubeless Air Valve
- Installation Instructions
$21.99 - $49.99
When gluing high performance tubular tires to your high performance wheels, be sure to rely on Challenge's Universal Rim Cement. This glue is formulated to provide maximum adhesion and hold on both alumimum and carbon rims, even in high temperature conditions. Dive into high speed corners with confidence.
$15.90 - $29.99
- 2-ply rubber shield fits between tire and tube to prevent flats
- Pair
$24.99
Those guys who said "Tubeless tires never get punctures"? They lied. The Blackburn Plugger Tubeless Tire Repar Kit is a quick, one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat. Mount it to your frame, tape it to your top tube, or strap it to your ankle like a shark knife. Just keep it close and it'll get you out of trouble. Pronto.
- Stores ten plugs.
- 27g tool only 47g tool with strap
$10.80 - $85.00
45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud with a concave carbide-aluminum design. The open space and edges created by the large concave crown result in twice the surface area for increased traction and grip.
- Concave tip for traction, durability, and longevity
- Aluminum base to save weight
- Compatible with 45NRTH stud insertion tool
- Compatible with all studdable 45NRTH tires
- We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.
$9.00
The 45NRTH stud insertion tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products.
- Tire studs sold separately
- POM-injected handle
- Stainless steel barrel
- Thumb and index finger grips for more comfort and control
- Compatible with studs that have a 3.5mm or smaller shaft
$36.00
• Synthetic elastomer gasket with 2X the holding power and 5X wear resistance of traditional gasket materials
• Two stage seal design, improves sealing and stability on all presta valve stems
• Adjustable compression, user can tighten the cap to increase holding power by 4X and compensate for wear
•15 degree stem angle reduces stress on the valve stem from pump hose
• 12.0g
$62.00
Tubeless Valve/Tape Kit
- Includes Tape, 2 Universal Valves & 1 Valve Core Wrench
$15.00
Precision engineered for precise inflation of your Zipp wheels, these Zipp Tangente Valve Extenders take the hassle out of short Presta valves.
- For use with threaded Presta (non-removable core) tubes
- Knurled end to keep pump from slipping
- Available in all lengths to match all Zipp wheels
- 3mm hex broach in the barrel to guarantee a perfect seal when tightened
$15.00 - $21.00
Works with Zipp butyl inner tubes with a removable core as well as other leading tubular tires and inner tubes that have removable cores. Available as a kit (3 extenders and 2 wrenches) or individually.
- For use with removable valve core Presta tubes
- Knurled end to keep pump from slipping
- 3mm hex broach in the barrel to guarantee a perfect seal when tightened
- Integrated air seal
$16.00
A good pair of valves can make a big difference in the reliability and ease-of-use for any tubeless setup. Whisky's No. 7 Brass tubeless valves help ensure your tires are dialed for every ride. And, it's always a good call to keep an extra valve in a pocket or bag.
- For use with Whisky tubeless rims and most others
- 40mm length
- Fits up to a 8mm valve hole
- Removable valve core
- Sold as a pair
$6.95 - $27.95
- Repairs punctures up to 1/4 (6mm)
- Optimized for temps down to 15degF (-9.4degC)
- Synthetic later minimizes the risk of allergic reactions
$59.99
Air-Liner GRAVEL is an insert for tubeless-ready gravel tires. Re-usable and very easy to install—as easy as mounting an inner tube on your tire—Air-Liner GRAVEL is compatible with tubeless-ready tires only and with 3-way valves (5-way valves are included for ultimate airflow). The insert can be used with sealant—preferably sealants without ammonia.
- Air-Liner increases control, durability, performance, and protection of both tire and wheel.
- Compatible with any wheel size up to 700c with 3-way tubeless valve, and tire widths from 31mm to 40mm.
- The Vittoria Air-Liner is a tire insert, designed for use in tubeless tires.
- Sold individually (single tire).
Page 1 of 6
Next page