Filter By:
Parts & Accessories
$24.99
CycleOps' Sweat Guard is a valuable accessory for any trainer. It keeps corrosive sweat from harming your bike and home. It's made from soft, absorbent, washable terry cloth and is attached with elastic and Velcro straps. Two front pockets keep the remote, phone, or food close by while you're hammering away.
$119.99
This handlebar bracket has been developed so you can attach a tablet to your handlebars. The design provides a safe distance so that no sweat falls on the screen while you are training.
- Suitable for handlebars with a diameter ranging from 26mm to 35mm
- Adjustable to different tablet sizes: length 182-267mm, width 112-197mm, max. thickness 13mm
- Replacement freehub body compatible with Neo 2T (T2875.60), Flux S (T2900S.60 A), Flux 2 (T2980.60 A) direct drive trainers
- NOT compatible with older generation Neo (T2800), Neo 2 (T2850/T2850.60), Flux (T2900), Flux S (T2900S/T2900S.60) and Flux 2 (T2980/T2980.60)
$69.99
- Adapter for Tacx Direct Drive trainer
- 01 is compatible with 142 x 12mm and 148 x 12mm
- 02 is compatible with 135 x 10mm
- 03 is compatible with 135 x 12mm (w/5 mm spacer included with every Tacx Direct Drive
trainer), 142 x 12mm and 148 x 12mm
- 04 The thru axle adapter kit is for bikes with a 12 mm thru axle. The axle adapter is required to couple the rear stay with the
thru axle mount on a Tacx NEO or FLUX Smart trainer.
$44.99 - $59.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.
$29.99
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.
$49.99
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.
$29.79
• Plastic riser block allows the position of front wheel at one of two heights
$8.79
Replacement straps for Sunlite FlatForm II pedals
- Strap size: 340 x 55mm
$59.99
Adapts a thru axle hub bike for a Saris bike trainer.
- Trainer Thru Axle Adapter For Saris Trainers
- Thread pitch: 1.00 & 1.75
What's Included:
- Thru axle
- Washers
- Endcaps with bolts
Trainer Compatibility
The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions.
Bike Compatibility
Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
$49.99
The Saris thru axle adapter is designed for indoor use on Saris- or CycleOps-branded trainers only and should not be ridden outdoors.
- Compatible with Classic series trainers and most Pro series trainers. Not compatible with PowerSync trainers. Contact us with trainer compatibility questions.
- This adapter is designed to work with bikes that have a 142x12mm thru axle with 1.0 or 1.75 thread pitch.
- The axle is threaded on both sides to fit both Syntace and Maxle/ABP style thru axle systems.
- Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly.
What's Included
- Thru axle
- Washers
- End caps with bolts
$49.99
For a stable, worry-free ride with any rear wheel-mounted trainer.
Product Features
- For a stable, worry-free ride with any rear wheel-mounted trainer.
- Unique 3-level design lets you select the level of difficulty.
- Stack two blocks to simulate climbing workouts.
Three different positions to raise your front wheel and simulate hill climbs
- 2.1 inches (5.3 cm)
- 2.7 inches (6.8 cm)
- 3.1 inches (7.9 cm)
$24.99
The Saris Leveling Block keeps your bike level with your trainer.
- Adds stability to your training ride.
- For use with any rear wheel-mounted trainer.
- Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
$39.99
Adjust resistance on Mag trainer without leaving the saddle.
- Quick Release mounting system fits most stems.
- For use with the Mag bike trainer only
$79.99
Protects your floor from sweat and bike grime.
Product Features:
- Protects your floor from sweat and bike grime.
- Keeps your trainer from "walking" during intense workouts.
- Durable construction absorbs vibration and noise.
- Training mat measures 65 x 36 inches.
- Black PVC foam gives the training mat superior sound absorption.
- Resistant to moisture, and easy to clean with soap and water when necessary.
$29.99
Keeps corrosive sweat from reaching your frame.
- Cell phone pouch included.
$359.99
Trainer Mission Control
Every training room needs a control center, and the TD1 is more than equipped for the job. Featuring built-in power strip with 2 AC and 2 USB outlets, this indoor trainer desk was designed to keep everything you need charged, organized and close at hand. Its roomy 12" x 20" table top is made from laminated birch for easy clean up, and is supported by stainless, corrosion-resistant steel sourced from America’s heartland.
And as part of the Saris trainer eco-system, the TD1 is a perfect complement to the MP1 trainer platform. After just one ride with a dedicated trainer desk, you’ll ask yourself how you ever rode indoors without one.
- Stay Charged: built-in power strip keeps training necessities nearby and powered up.
- Pick Your Height: adjustable for wide range of bikes and training configurations.
- Easy Cleaning: laminated birch wood top makes for easy clean-up post-ride.
- Steamlined Look: built-in cable management and stainless steel hardware are both functional and eye-pleasing.
- Enhanced Experience: a great addition to indoor training.
Specs
- Base: 13-inches wide x 36-inches Depth
- Desk Top: : 12-inches Width x 20-inches Depth
- Adjustable Desk Height from Floor: 40- to 55-inches
- Materials: Laminated birch table top supported by a steel frame, featuring stainless steel and corrosion-resistant hardware
- Cord Length: 6- foot AC cord
- Built-in power strip with 2 AC and 2 USB outlets
- Built-in cord retention clips for easy cable management and a clean look.
$59.99
TRAINER THRU AXLE ADAPTER FOR SARIS TRAINERS
WHAT'S INCLUDED:
- Thru axle
- Washers
- Endcaps with bolts
- The 148x12mm adapters also come with a shorter bolt action slider tube.
TRAINER COMPATIBILITY
The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions.
BIKE COMPATIBILITY
Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please reach out to your local bike shop or the bicycle manufacturer directly. Both 148x12 Thru Axle Adapters are compatible for both 142 and 148mm bikes.
148x12 Thru Axle Adapter, 1.5 Thread Pitch (9733T) works for:
- 148 x 12mm
- 142 x 12mm
- 1.5 thread pitch
$129.99
Everything you need for the best indoor trainer experience possible.
- Can be used across a wide range of trainer setups.
- Includes Trainer Mat, Climbing Block and Saris towel.
$29.99
- Includes clutch knob and L-bolt
- Basic Trainer Clutch Knob is compatible with any Wind, Mag, Mag+, Magneto or Fluid trainer that already uses L-bolt
- Magnus Clutch Knob should only be used with Magnus Smart Trainer
- Watch our video to learn more
$54.00
Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season.
- When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out.
- The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability.
- No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench.
- Designed, built, and quality tested in the USA. Proven around the world.
Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.
$12.99
Keep your handlebar organized and your devices secure with the LW-STD (22.2/25.4/28.6mm) from Minoura.
- Alloy clamp for mounting your own device on handlebar or stem
- Lightweight and rustproof aluminum construction
- Hex wrench required for instillation and removal
- Clamp body has (1) M5 Thread hold in center
- 22.2 mm-28.6 mm diameter range
$16.99
The Mag Riser Block 3 from Minoura lifts up your front wheel during a training session to be at a natural level. This block fits both MTB and Road bike tire widths.
- Fits under front wheel to level the bike to get natural riding on training
- Double grooved design fits your narrow or wide ties
- Polyethylene material minimizes weight at 1/2 lb.
- 8.6D X 4.7W X 2.75H (inches)
$37.99
The TPH-1 Tablet Grip from Minoura is the ultimate tablet holder for indoor training. Fitting a diameter between 28mm and 35mm, this stand will fit most bicycles.
- Perfect accessory to use with LiveTraining Apps, The Sufferfest videos, or other media
- SM clamp easily mounts or dismounts from the handlebar or tube
- Spring-loaded clamp system is simple to use and securely holds your device in place
- Holds from a 7.9 to 9.7 inch screen with 360 degree rotation system
- Can mount to your repair stand so you can easily reference the Internet when working on your bike
$66.00
Of course you love your Omnium Trainer, but you’re left wondering how you could possibly love indoor cycling training even more. Easy, our non-slip and water-repellent (aka sweat) Floor Mat is designed to keep you safe and protect your floors while in your cycling cleats indoors. And because your cycling training plan asks for incredibly intense efforts, the Floor Mat can ensure firm contact with the ground and prevent movement during leg-busting intervals. Add a Sweat Guard to your indoor cycling collection and you’ve got a training party!
- Non-slip surface keep you safe while in cycling cleats
- Protects floors from sweat and bike grime
- Water-repellent surface does what it was designed to do – keep sweat off your floor
- Compress-ability ensures trainer stays put during intense efforts
- Easily rolls up for storage
- Cleans easily with soap and water
- Absorbs noise and vibration
- Enhances overall stability of any indoor trainer setup
- 4mm (5/32?) thickness is optimal balance of support and storage
$170.00
You’re already a proud owner of the Omnium Over-Drive Bike Trainer, but today you’re looking for a resistance-free, simple and effective spin session. Designed to be lightweight and portable, the Omnium Zero Resistance Sled is adaptable to whatever bike you ride and whatever workout you’re targeting – let the Zero-Drive Sled be your next training accessory.
- Precision machined 4.25” aluminum rollers create a smooth and quiet ride
- Dynamic, free-floating rear wheel design promotes the most realistic, road-like riding experience
- Adaptable to virtually any bike (up to 1348mm wheelbase with optional extender)
- No tools required to assemble or store — simply unfold for use and fold for storage and travel
- Maintenance-free resistance unit and roller bearings
- 3-Year Warranty
Page 1 of 2
Next page